Files
simple-aircraft-manager-rails/docs/guide/components.md
T
rickyandClaude Opus 5.5 31ac991bab Overview shows coming due and the last flight; intervals in days, months or years
- Overview: "Coming due" (next 30 days or 10 hours) and "Last flight" (the
  most recent day's legs, meters at the end, fuel and oil left).
- Component replace / TBO / inspect intervals, inspection types and ADs take
  a number and a days / months / years choice (CalendarInterval). Components
  gain month columns (years stored as 12 months; months land on the same
  date); inspection types and ADs keep end-of-month. ADs now honour days.
- Due list: hours already run out count as overdue; a component covered by
  an inspection type no longer gets its own "Inspect every" item.
- Loading calculator moved to a partial; no limit warnings until a load is
  entered. Header buttons don't wrap on phones.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-11 21:40:14 -05:00

2.0 KiB

Components

The Components tab is a tree of the aircraft's parts: engine, propeller, magnetos, filters, ELT battery and so on, each with its own time and limits. Owners manage it.

Adding a component

+ Add Component, or + Sub-component on a component's page to put one under it (an oil filter under the engine, say). For each:

  • Type (pick one, or type a new one), manufacturer, model, serial number, install location and status.
  • Time: date in service, total time, last overhaul or service, hours since, and for engines and propellers the overhaul kind (printed in logbook entries as SMOH, SFOH or SNEW).
  • Limits:
    • Replace every hours and/or a calendar interval in days, months or years (whichever comes first); Replacement critical makes overdue replacement ground the aircraft (oil, filters, ELT battery…).
    • Expires on: a date marked on the part, such as an ELT battery's.
    • TBO hours and/or a calendar interval. Under Part 91 TBO is usually a recommendation; tick Treat TBO as a hard limit only when an AD or the airworthiness limitations make it one, or On condition to show it without warnings.
    • Inspect every hours and/or a calendar interval, counted from the component's last service. For an inspection with its own records (an oil change, a magneto inspection, the ELT check), set it up on the Inspections tab and apply it to the component instead: the inspection then governs and the component's own interval is ignored.

Logged hours are added to every component that's in service.

Service and replacement

On a component's page, Service / Replace → Record Service resets hours since overhaul or service to 0 and sets the service date to today, for example after an oil change. Tick Part was physically replaced to reset its total time and in-service date too.

Record the work in the logbook as well: the component reset tracks time, the logbook entry is the record.

Show disposed lists parts that have been removed and disposed of.