# Components The **Components** tab is a tree of the aircraft's parts: engine, propeller, magnetos, filters, ELT battery and so on, each with its own time and limits. Owners manage it. ## Adding a component **+ Add Component**, or **+ Sub-component** on a component's page to put one under it (an oil filter under the engine, say). For each: - **Type** (pick one, or type a new one), manufacturer, model, serial number, install location and status. - **Time**: date in service, total time, last overhaul or service, hours since, and for engines and propellers the overhaul kind (printed in logbook entries as SMOH, SFOH or SNEW). - **Limits**: - **Replace every** hours and/or a calendar interval in days, months or years (whichever comes first); **Replacement critical** makes overdue replacement ground the aircraft (oil, filters, ELT battery…). - **Expires on**: a date marked on the part, such as an ELT battery's. - **TBO** hours and/or a calendar interval. Under Part 91 TBO is usually a recommendation; tick **Treat TBO as a hard limit** only when an AD or the airworthiness limitations make it one, or **On condition** to show it without warnings. - **Inspect every** hours and/or a calendar interval, counted from the component's last service. For an inspection with its own records (an oil change, a magneto inspection, the ELT check), set it up on the **Inspections** tab and apply it to the component instead: the inspection then governs and the component's own interval is ignored. Logged hours are added to every component that's in service. ## Service and replacement On a component's page, **Service / Replace → Record Service** resets hours since overhaul or service to 0 and sets the service date to today, for example after an oil change. Tick *Part was physically replaced* to reset its total time and in-service date too. Record the work in the [logbook](logbook.md) as well: the component reset tracks time, the logbook entry is the record. **Show disposed** lists parts that have been removed and disposed of.