Files
simple-aircraft-manager-rails/docs/guide/inspections.md
T
rickyandClaude Opus 5.5 31ac991bab Overview shows coming due and the last flight; intervals in days, months or years
- Overview: "Coming due" (next 30 days or 10 hours) and "Last flight" (the
  most recent day's legs, meters at the end, fuel and oil left).
- Component replace / TBO / inspect intervals, inspection types and ADs take
  a number and a days / months / years choice (CalendarInterval). Components
  gain month columns (years stored as 12 months; months land on the same
  date); inspection types and ADs keep end-of-month. ADs now honour days.
- Due list: hours already run out count as overdue; a component covered by
  an inspection type no longer gets its own "Inspect every" item.
- Loading calculator moved to a partial; no limit warnings until a load is
  entered. Header buttons don't wrap on phones.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-11 21:40:14 -05:00

19 lines
1.2 KiB
Markdown

# Inspections
The **Inspections** tab shows each required inspection, when it was last done and when it's next due.
## Setting up
**Standard inspections** adds the recurring inspections and checks Part 91 calls for (annual, 100-hour, pitot-static and altimeter, transponder, ELT…). Pick the ones that apply to how the aircraft is flown; each comes with its interval and what being overdue means, and you can change them afterwards.
**+ Inspection Type** adds your own, for example a recurring inspection from an STC's instructions for continued airworthiness. Each type has:
- **Recurring** every so many hours and/or days, months or years (months and years are calendar months, due at the end of the month).
- What overdue means: **grounds the aircraft**, **no IFR flight** (91.411), **transponder can't be used** (91.413), or **advisory only**.
- **Overrun allowance**: for the 100-hour, 10 hours. Done late within it, the next one counts from when it was due (91.409(b)).
- **Also counts as**: an annual also counts as the 100-hour.
## Recording an inspection
**Record** next to an inspection logs the date and hours it was done, optionally linking the logbook entry. The [logbook](logbook.md) entry is the signed record (14 CFR 43.11); write it too.