Flights can be corrected after they're saved

- Edit on a flight: owners can correct any flight; a pilot, the flights
  they logged (the same rule as its engine data).
- Date, airports, route, notes, oil and fuel (its oil and fuel records
  follow) and the attached files can always be changed.
- The meter readings only on the latest flight, while its tach in is
  still the aircraft's tach: the aircraft and installed components move
  by the difference, and with both readings the duration is worked out
  from them. On earlier flights they're locked (later flights started
  from them), pointing to Update Hours; the server ignores them too.
- Each correction is in the activity log with what changed.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
This commit is contained in:
rickyandClaude Opus 5.5 committed 2026-11-15 17:12:05 -05:00
1 parent 34879e7310
commit d2cd60c6a7
11 files changed
+274 -38

No files matched your search

+8
View File
@@ -17,6 +17,14 @@ On a phone or tablet with the app installed (see [Getting started](getting-start
Track and engine data files attached offline are kept and sent too.
## Correct a flight
Open the flight and choose **Edit**. Owners can correct any flight; a pilot, the flights they logged. The date, airports, route, notes, oil and fuel (its oil and fuel records follow), and the track and engine data files can always be changed.
The meter readings can be changed only on the latest flight, and only until the hours change again (another flight, an hours update or an import). The aircraft and its installed components then move by the difference: fixing a tach in of 1001.4 to 1001.6 adds 0.2 hours. On earlier flights the readings are locked, since the flights after them started from those readings; correct the aircraft's hours with **Update Hours** instead.
Deleting a flight (owners) doesn't take its hours back off; use **Update Hours** for that too.
## Update hours
When you don't log each flight, use **Update Hours** on the overview: enter the current meter readings and the difference is applied to every installed component. A reading lower than the current one is treated as a correction.